1. Для установки любой прошивки ее нужно положить на флешку в папку PS3\UPDATE\ , название прошивки должно выглядеть так - PS3UPDAT.PUP
2. Изначально консоль выключена.
3. Зажимаем кнопку питания и ждем, пока не прозвучит два сигнала (по одному, через небольшой промежуток времени).
4. Консоль отключится.
5. Зажимаем кнопку питания еще раз и ждем, пока не прозвучит один сигнал. Через небольшой промежуток времени прозвучит два сигнала подряд.
6. Отпускаем кнопку питания и попадаем в рекавери меню. В нем нас интересует самый нижний пункт - System Update
Here is the procedure for access:
- Put the PS3 in standby (red LED)
- Hold down the power button: the system will turn on and turn off at the third beep
- Once off the PS3, hold down the power button again, you will hear 2 beeps and beeps twice
- At this point you will be prompted to connect the controller to the USB port
- Press the PS
- If you present a menu with the following options:
• Restart System: Please restart the PlayStation 3.
• Restore Default Settings: Reset all system settings to default
• Restore File System: Check any system files corrupted or missing.
• Rebuild Database: Rebuilds the OS PLAYSTATION 3.
• Restore PS3 System: reset: erase everything and start again from the factory defaults.
• System Update: Update the PLAYSTATION 3 firmware with a user-supplied