Сообщение от ErikPshat
(Сообщение 1213730)
If you have a working PSP, then we insert our future magic memory card and connect the PSP via USB to a computer, or use a card reader.
We enter the diskpart command in the console , you will see how it worked and accepted the DISKPART> prompt , then everything is fine:
diskpart
Next, enter the list disk command to get a list of disks, you will see a list of computer disks and connected USB devices:
list disk
Look carefully at the list and remember the Number under which your memory card was identified.
Now we write: select disk Digit (in my case, instead of the word " Digit " - I write 2 )
select disk 2
We decided on the disk, we make sure again carefully that we did not miss the number, so as not to accidentally format our computer hard disk.
Now we write the following commands in turn and after each press Enter:
(occasionally diskpart does not have enough rights the first time the commands are executed, it's okay, in case of an error, repeat the command or the dependent sequence)
clean
create partition primary offset 1000
select partition 1
active
format fs = fat32
select partition 1
assign
exit
Well, this is not necessary, you can assign a name to the memory card, then enter the following command: LABEL F : PANDORA , where F is the identified letter of your memory card on the PC, and PANDORA is the name of the volume label (no more than 11 characters):
LABEL F:PANDORA
Starting from choosing the disk number, you should get everything exactly the same as in the screenshot below. That is, all commands must be executed unconditionally and flawlessly:
Well, in the explorer "This computer" you will see your memory card called " PANDORA "
Thus, we freed up the necessary space for the IPL record, and formatted all the remaining space in FAT32, activated it, assigned the name of the volume with the mount point. Now we go directly to the very process of writing the IPL to the separated free space ...
It is necessary to disconnect the memory card from the computer. Disconnect the "USB Connection" on the PSP or disconnect the card reader from the computer.
From the already familiar archive Service_memstick_TA-088v3.zipextract the Write IPL to MS folder to your desktop . Now we need it ...
Enter this folder by running the following command in the console: cd "C: \ Users \ user_name \ Desktop \ Write IPL to MS" , where user_name is the name of the computer user profile:
cd "C:\Users\user_name\Desktop\Write IPL to MS"
Now enter the following command to write the IPL (keep in mind that at this point the memory card should not be connected to the computer!):
MSINST\msinst.exe multiloader_ipl.bin
You will see a request to connect a memory card: Connect target MsProDuo . Now is the time to create a "USB Connection" on your PSP or plug in a card reader.
When connected, the program will immediately identify the memory card and scan it for compliance. You will see a prompt to record the IPL: Are You Sure? [Y] . Naturally we agree in Latin layout - the Y .
If everything went well, at the end you will see the following message: Write MS BOOT CODE . Your whole process should look like this:
Well, that's all, the most important thing we have already done, that is, screwed up the memory card and made it magical! Now we just need to reset the Pandora files to the memory card ...
If you remember, in Step 3 we already extracted the Extracted Files Original folder from the archive .
Now move all its contents from there to the root of the magic memory card, these are 3 folders and 1 file:
id
jig
vsh
pspbtcnf.txt
And move to the magic card from the decrypt_sp-master folder our enc folder , which was renamed to prx containing the * .prx.enc files encrypted with the MSID key for this new magic memory card in the previous Step 5 .
All! Your magic Pandora memory card is ready!
For the Pandora's kit to work, you will also need a magic pandora battery. Only an original Sony battery from the official kit that came with the PSP from the factory, or a special Pandora battery produced by third-party manufacturers, is suitable. You can find out more about making Pandora's magic battery in the topic.PANDORA 5.00 М33-6 SLIM & FAT...
All! With this Pandora's kit, you can now restore any PSP-100X or PSP-200X model, including those with the TA-088v3 DATE CODE 8C motherboard, even if the PSP has completely removed the firmware.
|
