Pandora для PSP-100X/200X - JigKick Kit без пайки на WSL Ubuntu

[Dajjal]

Сообщение от Yoti Dajjal, с некоторых китайских палёнок можно программатором вычитать, если повезёт. А получить ИД карты с оригинала или переходника кроме как консолью с кастомом не выйдет. Так что ответ - да.

Окей, понял. Но я до ответа снял дамп через WinHex, подсунул его в папку и ./decrypt_sp -e отработала без ошибок. Это просто баг инструмента и шифровка пустым ключем?

[ErikPshat]

Сообщение от Dajjal я до ответа снял дамп через WinHex

Никакой WinHex или Hex Workshop или HxD не снимет тебе в дампе системную область карты памяти. Контроллёр просто не даст.
А decrypt_sp переподпишет тебе файлы хоть нулевым ключом.

[Dajjal]

Сообщение от Dajjal Окей, понял. Но я до ответа снял дамп через WinHex, подсунул его в папку и ./decrypt_sp -e отработала без ошибок. Это просто баг инструмента и шифровка пустым ключем?

Попробовал прошиться обычной пандорой - прошился. Заодно там посмотрел ключи материнки - оказалось, что у меня 88v2, соответственно, всё заработало. Считал, что 3, т.к. нагуглил, что второй вариант определения материнки - это код под UMD приводом.

[ErikPshat]

POC: Sony PSP™ JigKick PC emulation demo

[Yoti]

Сообщение от TJA221 Question is there any way to dump msid.bin without a psp?

No.

Сообщение от TJA221 i can read my cards unique id with my laptop in linux

Show us your ID.

Сообщение от TJA221 anything that does not involve using another psp?

Card NAND dump and HEX Editor.

[Yoti]

Сообщение от TJA221 83XXX34e436XXXXXXXXff06b1500f329

This is just random number and not MSID. Example one:

Сообщение от ErikPshat 204D5350534E593000788884C6AA0000

At least first and last two bytes must be same.

[TJA221]

Сообщение от Yoti This is just random number and not MSID. Example one: At least first and last two bytes must be same.

My mistake! you're correct
Thank you for helping me

[wad11656]

I can't believe it took me this long to hear about this! Great community. Thank you for not requiring holding "L" to access Magic Memory Stick, for systems with broken buttons. And for the very clean, thorough, and user-friendly tutorial

[DodFood]

Hi there, i followed all the instruction but when i put on my pandora battery, nothing happen. still just a green light and no memory access. mobo ta088. any help?
thanks in advance

[ErikPshat]

DodFood, most likely the battery is not Pandora or the files were signed with the wrong MSID-key.

[DodFood]

Сообщение от ErikPshat DodFood , most likely the battery is not Pandora or the files were signed with the wrong MSID-key.

Сообщение от khubik Try flashing IPL with MSINST and make sure you did PRX re-encryption right. Or just send your MSID here, I can do the re-encryption for you.

Just found out my battery is not pandora even with hardmod.



DodFood добавил 23.02.2021 в 15:31
have tried another psp 2k. and it wont boot. it's my pandora battery problem.


DodFood добавил 23.02.2021 в 15:31
https://drive.google.com/file/d/18pw...ew?usp=sharing

[khubik]

Сообщение от DodFood Hi there, i followed all the instruction but when i put on my pandora battery, nothing happen. still just a green light and no memory access. mobo ta088. any help? thanks in advance

Try flashing IPL with MSINST and make sure you did PRX re-encryption right. Or just send your MSID here, I can do the re-encryption for you.

[ErikPshat]

Сообщение от khubik Try flashing IPL with MSINST

Well, in step number #6, in point number #12, this is exactly what is described in great detail.

Сообщение от ErikPshat Now enter the following command to write the IPL (keep in mind that at this point the memory card should NOT be connected to the computer!): MSINST\msinst.exe multiloader_ipl.bin

[DodFood]

Сообщение от khubik Try flashing IPL with MSINST and make sure you did PRX re-encryption right. Or just send your MSID here, I can do the re-encryption for you.

I just make another Pandora from another battery and now it's working, tested hellcat on another psp. Can you help me and make for me because i having problem with ubuntu. the make function is not working and it's show all error on the screen. https://drive.google.com/file/d/14G2...ew?usp=sharing

Ubuntu error on make. https://drive.google.com/file/d/1o7u...ew?usp=sharing

Here is the MSID & Attr file: https://drive.google.com/file/d/1WCd...ew?usp=sharing

Thanks in advance.

[ErikPshat]

Сообщение от DodFood Ubuntu error on make. https://drive.google.com/file/d/1o7u...ew?usp=sharing Here is the MSID & Attr file: https://drive.google.com/file/d/1WCd...ew?usp=sharing

No access. Use photo hosting for pictures https://imageban.ru/, https://funkyimg.com/, http://www.imagebam.com/, https://imgbb.com/, https://imgur.com/upload, https://prnt.sc/

Сообщение от DodFood Ubuntu error on make.

Follow the instructions from the topic header -> Step 2:

[DodFood]

Сообщение от ErikPshat Follow the instructions from the topic header -> Step 2 :

All follow and using pure Ubuntu via VM. See Photos. Same results. : dash:


1.Essential Installed.


2.GCC Installed.


3.Make Installed.


4.Make Error.

[ErikPshat]

DodFood, install Ubuntu 20.04 LTS

1. Ignore warning messages. When compiling, you should get something like this:
   
2. A compiled file decrypt_sp should appear in the folder.
3. Then go to Step 3...
4. Copy the prx folder there and write from the prx files decryption key to msid.bin with which these files were encrypted:
   
   
   
5. Then run the decryption command:
6. Then write down your key from your memory card to msid.bin and execute the encryption command:
7. All done!

---

Just do not try to run files for Windows on the Linux system such as for example: reg.exe, chcp.com, powershell.exe

[DodFood]

OK. ErikPshat, just waiting installing LTS. If still have error can you help me create the mms file. Here is my MSID

Thank you

Make fail again with LTS:

[ErikPshat]

Сообщение от DodFood OK. ErikPshat, just waiting installing LTS. If still have error can you help me create the mms file. Here is my MSID Thank you

OK. Pandora_for_DodFood

[DodFood]

Сообщение от ErikPshat OK. Pandora_for_DodFood

Thank you Erik.

But i realy don't know why i'm the only one who fail to get it work..... facepalm.: unknw: