он в раре с иршеллом. В этой пдфке есть оглавление. Тебе нужна глава 7.2.6.
Вот её содержание:
7.2.6
7.2.6 2-Player PS1 Games via Adhoc WiFi (2 PSPs required)
Currently, this feature isn't very stable. Games may lose synchronization during 2-Player
battle. Some games seem to work better than others, however. You may also try the same
game using different POP version and see if it helps. POP from firmware ver 3.52, 3.71 & 3.72
are not supported.
Supported POPS Versions for 2-Player Adhoc:
● 3.10 - 3.51 & 3.60 (You can choose these POPS versions under CFWs 3.52 M33-4, 3.60
M33 and 3.71 M33-3 when using Popsloader.
Usage Instructions:
● Make sure both PSPs are using the same POP version.
● To enable 2 Player Adhoc, goto iR Configurator and set "POP 2 Player Support" to "Adhoc
WiFi".
● Choose the same PS1 game on both PSPs. Please note that this must be the exact same
game generated by the same popstation and must have the same Game ID.
● You'll see the other player on the PSP screen. The one who initiates the connection request
will be the Client and the other will be the Server.
● Once the Server confirms the connection request, the Server will send the PS1 game save
to the other PSP. This game save is important as different saves will not be able to sync. In
order to avoid overwriting with the original save on the Client PSP. iR Shell will rename your
original game save directory and prepend it with a "~". For example, your original save
directory is "SLPS12345" and it will be renamed as "~SLPS12345".
● When you no longer wants to play Adhoc WiFi for the specific game, you can then delete
the new save and rename your original save back. If you don't care about your original
game save, you don't have to take any actions.
Limitations:
● Make sure you don't press the HOME button while Adhoc is running. Doing so will result in
lose sync.
● If you need to convert a game save to another POP version, do it before activating adhoc
mode. If you convert the game save under adhoc mode, it won't sync.
8. iR
Есть реквест тем, кто программит. Имеется исходник плагина PSPWrite для иршелла (не самой проги, а именно плагина для шелла). Реквест в том, чтобы включить в него кириллический фонт. Сам я на зыз никогда не программил, так что ищу помощи у спецов.
Исходники залил сюда
добавлено через 10 минут
Кстать, читать тексты во время игры не получается - оно пишет, шта в бэкграунде уже запущена другая программа.
Последний раз редактировалось FLYNN; 24.11.2007 в 14:33.
Причина: добавил, подумав
Вобщем сёдня пригласил друга и мы погамали в Crash Bash вдвоём! А всё довольно просто, если у вас есть мозги:
1) Загоняете попслоадер на карточку памяти (можно не активировать даже через рекавери)
2) В настройках иршелла выбираете: POP Ver: Use popsloader plugin
3) Выбираем в настройках ещё одну опцию: POP 2 Player Support: Adhoc WiFi
4) Запускаем на обоих ЗЫЗах одну и ту же игру, появится экран выбора ПОПС, выбираем 3.51 (если у вас прошивка 3.51, то вообще можно было в настройках оставить Original from flash
5) Пойдёт поиск друг друга, как только приставки найдут друг друга, нажмите крест на одной приставке, затем на другой.
6) Вот и всё, пойдёт загрузка игры и можно приступать к процессу
З.Ы. При конвертировании игру НЕ СЖИМАТЬ, т.к. она будет тормозить
Можно ли найти подробную инструкцию по использованию irshell на русском языке. Ато когда я запустил прогу я обалдел от количества англоязычных сокращений.
Как пользоваться функциями для чего они и тд и тп... Буду очень признателен если опубликуете такую инструкцию...
В дос окне есть список примерно такой: 3.xx=1 3.xx=2 3.xx=3 ......... 3.xx=8 выберите цифру около которой написана ваша прошивка (вметро3.xx будет написано например 3.30 или 3.60
2.81=>3.03=>3.10=>3.30=>3.50=>1.5=>3.40 OE-A=>3.52M33-4=>3.71M33-3 + 1.50 kernel addon
SanDisk 4Gb + ASUS WL-138g v-2 + 47.9 Gb Iso Games
Последний раз редактировалось I Love OE; 24.11.2007 в 19:30.
Причина: добавил, подумав