BaryonSweeper - эмулятор сервисной батарейки JigKick для анбрика PSP

[jas0npc]

Сообщение от Valera0141 Can you wait? I want to add something to the board and update the firmware

I did get the newer version Thank you for doing this project

[Valera0141]

Сообщение от jas0npc I did get the newer version Thank you for doing this project

It will be interesting to see how you get the device. I made boards at home, it's interesting to see the factory production. Once you get it, please share a photo.

[jas0npc]

Сообщение от Valera0141 It will be interesting to see how you get the device. I made boards at home, it's interesting to see the factory production. Once you get it, please share a photo.

Jlcpcb says it has been made and dispatched, As soon as i get them i will post a pic, BTW 5 boards with postage back to the uk cost me less than 5 GBP.

[jas0npc]

Сообщение от Valera0141 It will be interesting to see how you get the device. I made boards at home, it's interesting to see the factory production. Once you get it, please share a photo.

had them back here are a couple of pics
http://ibb.co/mG3T87W
https://ibb.co/LrZy6Ct

[Valera0141]

Сообщение от jas0npc had them back here are a couple of pics

cool, but you ordered a board not of the latest version, but of the highest one. I added 2 resistors to the new one under the atmega microcontroller. They assembled a voltage divider for small battery charges. Can drill the appearance and solder them to the tracks (I did this on previous versions), or leave it as is. Without it, a weak battery will not be detected. The rest of the functions will work fine.

[jas0npc]

Сообщение от Valera0141 cool, but you ordered a board not of the latest version, but of the highest one. I added 2 resistors to the new one under the atmega microcontroller. They assembled a voltage divider for small battery charges. Can drill the appearance and solder them to the tracks (I did this on previous versions), or leave it as is. Without it, a weak battery will not be detected. The rest of the functions will work fine.

I will redownload and order some more really looking forward to the build now. Thank you for all the work you put into this project.